Water heaters these days have become one of the essential electrical appliances. It offers hot water for a bath on a chilled morning and helps the homeowner to do various household chores easily and quickly. For almost every homeowner, it is a significant investment because they try to maintain it as long as possible.
Apart from annual maintenance of the unit via water heater repair in Brea experts flushing it regularly also extend the overall life span of the unit. This step will keep the water heater in shape from tip to toe and prevent severe disasters.
Now the Question Is How to Flush the Water Heater.
There are two types of water heaters: they are gas and electric heaters. If you have an electric water heater, then the below steps will guide you to flush the electric one efficiently. So, let's get started: -
1. Turn Off the Unit Along With the Water Supply
Your first move should be to turn off the unit's water heater and the water supply. To turn off the water supply of the unit, you will see a water pipe at the top of the unit and a shut-off valve which is going inside the unit. Turn off this valve and also your home's main water supply.
Apart from that, turn off the main electric supply, and if the unit is gas, then position the thermostat on the pilot. Remember, if you have just turned off the unit, it is an excellent idea to let the water sit for a while so that the water and tank will cool down.
2. Connect a Garden Hose to the Drain Valve
The water heater repair in Brea experts state that once you are done with the above step, take a garden hose and place its one end into the floor drain or drain valve, which you will find at the bottom of the unit and one outside of the home.
3. Run Hot Water and Open the Drain Valve
Now open the hot water tap that offers hot water to you. This will ease the pressure, which will help the unit drain faster. However, when you open the tap, all the water will drain out of the water heater.
Here you must be patient as water will take some time to drain.
4. Turn On the Hot Water Supply Back After Flushing the Unit
When the drain valve is open, turn on the cold water that goes inside the water heater tank, which will remove all the residual sediment from the bottom of the tank.
You have to repeat this step, and the water will run clear again.
5. Close the Drain Valve
Now that the tank has flushed, you must close the drain valve and detach the garden hose from the unit. During this step, ensure your cold water supply valve is on so the water heater tank will refill again.
Now turn on the hot water tap and wait for the cold water to come, and then turn it off. Now switch on the electric supply of the water heater and check for leaks.
The Bottom Line
Boom, you have flushed the water heater perfectly, and now it's time to put a calendar for the next time. However, if you are not handy to do this type of work, ensure to hire the best water heater repair in Brea professionals for the work.
EZ Leak Detection is one of the best and most trusted plumbing companies offering the best service beyond expectations. No matter what type of water heater you have at your home, the company's professionals are highly professional and experienced in their work.
Comments